Esi

I lost an afternoon to a “routing loop” that turned out not to be a loop at all. It was an EVPN all-active multihoming feature quietly not working in a virtual lab — and the packets ping-ponging between two switches were a symptom, not the disease. This post is two things: a refresher on how Arista ESI (Ethernet Segment) multihoming actually forwards traffic, and a write-up of the specific trap you can fall into when you build EVPN designs on vEOS/containerlab instead of real hardware. ...

ESI Multi-Homing and ARP Suppression Issue: Duplicate Packets & Flooding When ESI is not functioning correctly, you may observe duplicate packets destined for hosts behind the ESI. Remote switches might flood traffic toward the ESI switches instead of handling it efficiently. TCAM Carving for ARP Suppression To use the suppress-arp feature effectively and prevent unnecessary flooding, you must allocate sufficient TCAM resources on the switch hardware. 1 2 3 # Configure TCAM carving for ARP suppression hardware access-list tcam region racl 512 hardware access-list tcam region arp-ether 256 double-wide Warning: It was observed that enabling suppress-arp caused reachability and ARP resolution to break between hosts when attempting to use RFC 5549 (BGP Unnumbered / IPv6 underlay) between Spines and Leafs for IPv4 and EVPN. Note that an IPv6 underlay is generally not supported for Cisco Nexus 9300/9500v platforms in this context. ...